R141 Cambelles soup pvb procor curtain sider spares

Have any questions or tips and advice on how to build those bits that don't come ready made.
Post Reply
majorbloodknock
Posts: 22
Joined: Mon Aug 18, 2008 9:00 pm

R141 Cambelles soup pvb procor curtain sider spares

Post by majorbloodknock »

Hi.
I have recently bought three pvb as above tops in mint condition, but have been trying to locate the chassis bottoms.
Now I have tried all Hornby spare outlets to no avail.
Would any one have any possible ideas for matching chassis that could be adopted, part numbers from other makers.etc.Any help appreciated.
Many thanks.
Steve.
User avatar
Mountain
Posts: 6792
Joined: Mon Oct 24, 2016 3:43 pm
Location: UK.

Re: R141 Cambelles soup pvb procor curtain sider spares

Post by Mountain »

I need to have a look if I can find where I put my spare wagon chassis to see what I have that might work. If I can find where I put them I will let you know.
User avatar
GeraldH
Posts: 1223
Joined: Fri Aug 13, 2010 6:10 pm
Location: Isle of Ballybongle
Contact:

Re: R141 Cambelles soup pvb procor curtain sider spares

Post by GeraldH »

These use the same chassis as the Hornby VDA, SAA and OBA's. You may find some SAAs with broken supports that you can cannibalise? It's quite hard to get the chassis off the bodies non-destructively, as I recall, as the bodies are clipped tightly on.
Gerald H - BNR Correspondent :-)

My layout: http://www.newrailwaymodellers.co.uk/Fo ... hp?t=28854
User avatar
Mountain
Posts: 6792
Joined: Mon Oct 24, 2016 3:43 pm
Location: UK.

Re: R141 Cambelles soup pvb procor curtain sider spares

Post by Mountain »

I can only find two long wheelbase chassis and I am not sure if they are going to be long enough.

20251006_222602.jpg
20251006_222602.jpg (16.31 KiB) Viewed 47 times

Both are plastic. Top one is Dapol and is around 114mm long with a 73mm wheelbase. The bottom one is Wrenn and is 126mm long approx., with an 84mm wheelbase. They look slightly narrower than the usual Hornby chassis width. They do not have wheels. I have two of the shorter chassis but only one longer chassis.. I do not have a suitable Hornby chassis. Will any of these do?
majorbloodknock
Posts: 22
Joined: Mon Aug 18, 2008 9:00 pm

Re: R141 Cambelles soup pvb procor curtain sider spares

Post by majorbloodknock »

Hi Mountain.
Thanks for looking for me.
I have just measured the body and they don't exactly fit.
Either to small or to short, sods law.
However thanks for you help.
Steve.
User avatar
Mountain
Posts: 6792
Joined: Mon Oct 24, 2016 3:43 pm
Location: UK.

Re: R141 Cambelles soup pvb procor curtain sider spares

Post by Mountain »

majorbloodknock wrote: Wed Oct 08, 2025 6:53 pm Hi Mountain.
Thanks for looking for me.
I have just measured the body and they don't exactly fit.
Either to small or to short, sods law.
However thanks for you help.
Steve.
No worries. You may need to make a chassis for them out of plasticard or similar. Have you tried secondhand businesses such as Elaines Trains, and also the online shop which is part of this site, as they sell Hornby and other makes of spares?
majorbloodknock
Posts: 22
Joined: Mon Aug 18, 2008 9:00 pm

Re: R141 Cambelles soup pvb procor curtain sider spares

Post by majorbloodknock »

No I didnt know they did spares.
Cheers.
Post Reply