NCE DCC SYSTEM.

[poliss]

This is how upnick explained it. " Press the PROG/ESC key in the bottom left hand corner then number 6 which is a short cut to cab set up.
Press enter to go into the set up and it will say TRK Current Y=1 so press number 1.
Press the prog/esc key to get back to main menu current will now be displayed where the clock was."

[BromsMods]

This is how upnick explained it. " Press the PROG/ESC key in the bottom left hand corner then number 6 which is a short cut to cab set up.
Press enter to go into the set up and it will say TRK Current Y=1 so press number 1.
Press the prog/esc key to get back to main menu current will now be displayed where the clock was."

Alternatively, use the manual!! Page 57 in version 1.28 or page 59 in version 1.65.

[mikehextall]

Ive read alot of comments and reviews of different DCC systems and the NCE PowerCab seems favourite to me, Ive searched for this and it is obviously American, can I get one that will work in the UK? in other words is their one with a UK power socket? Ive looked on eBay and they are all American.

Thanks

[BromsMods]

Try elsewhere than eBay then!!

[mikehextall]

That helps!

[BromsMods]

Great - many thanks. Google can be VERY useful with the right search terms.

[Flashbang]

Try the following!..
https://clarahost.clara.net/www.bromsgr ... egoryId=91
or
http://www.dccsupplies.com/shop/product ... cts_id=487
or
http://www.digitrains.co.uk/manufacturers/nce.aspx
or
http://www.dcctrainautomation.co.uk/tra ... r_Cab.html

[red death]

Or here: http://coastaldcc.co.uk/products/nce/ (I can thoroughly recommend Kevin and Nick who run Coastal DCC as extremely helpful and nice chaps).

Cheers, Mike

[ste234]

And I can recommend Broms Mods!