Some NRM Xtrkcad threads condensed into one
- Ironduke
- Posts: 1234
- Joined: Mon Sep 26, 2005 12:04 am
- Location: Ballarat Victoria Australia
- Contact:
Re: Some NRM Xtrkcad threads condensed into one
Make sure you choose your layout scale as HO not OO. Also the Peco parameter file does not include set track points, only streamline points but it does include some settrack curves.
Regards
Rob
Rob
-
- Posts: 18
- Joined: Mon Dec 11, 2006 11:54 am
- Location: Croydon, Surrey
- Contact:
Re: Some NRM Xtrkcad threads condensed into one
Is there a Windows based version ?
If so can someone post the link to the download lease?
The sourceforge appears (and I might be daft here) to have a Unix version.
Thanks in advance.
If so can someone post the link to the download lease?
The sourceforge appears (and I might be daft here) to have a Unix version.
Thanks in advance.
- Martin Wynne
- Posts: 6
- Joined: Sat Sep 01, 2007 1:36 am
Re: Some NRM Xtrkcad threads condensed into one
Hi,Lensmeister wrote:Is there a Windows based version ?
Windows version of XTrkCad is at (green button download): http://sourceforge.net/projects/xtrkcad-fork/
All about XTrkCad: http://www.xtrkcad.org
regards,
Martin.
-------------------------------
http://www.templot.com
-
- Posts: 18
- Joined: Mon Dec 11, 2006 11:54 am
- Location: Croydon, Surrey
- Contact:
Re: Some NRM Xtrkcad threads condensed into one
Cheers Martin
Re: Some NRM Xtrkcad threads condensed into one
Post de;eted, answered own question, sorry!
-
- Posts: 202
- Joined: Wed Aug 19, 2009 5:19 pm
Re: Some NRM Xtrkcad threads condensed into one
Hi,
Does anyone know where to download the hornby parameter files, that website that everyone suggests doesn't seem to work. And hornby 3rd rail doesn't give all the curves needed and I don't want to try making my own.
Hullude15
Does anyone know where to download the hornby parameter files, that website that everyone suggests doesn't seem to work. And hornby 3rd rail doesn't give all the curves needed and I don't want to try making my own.
Hullude15
Re: Some NRM Xtrkcad threads condensed into one
They're available from the Yahoo Groups XTrkCad page.
-
- Posts: 202
- Joined: Wed Aug 19, 2009 5:19 pm
Re: Some NRM Xtrkcad threads condensed into one
Another question, I am going to laser cut my design onto mdf. Is there a way of removing the lines around the edge that tells you how big your board is, the one that goes 0.0 1.0 2.0 etc ?
Re: Some NRM Xtrkcad threads condensed into one
save as an image and use your favorite image editor
Re: Some NRM Xtrkcad threads condensed into one
There is a post on here (somewhere) by Ironduke that has been fixed , its now a usable download
-
- Posts: 429
- Joined: Sat Mar 14, 2009 8:22 am
- Location: Basingstoke, Hampshire, United Kingdom
- Contact:
Re: Some NRM Xtrkcad threads condensed into one
The links for getting hornby track don't work anymoremumbles wrote: These two files add Hornby points and track sections to your XtrkCad tool bar in both OO and HO scale.
Instructions:
right click on these 2 links and choose "save target as" (for Microsift Internet Explorer) or "Save link As" (for Mozilla Firefox) and save it somewhere that you can find it e.g. the Desktop or "My Documents" (that's your My Documents not mine)
http://www.users.bigpond.net.au/robsstu ... rnbyHO.xtp
http://www.users.bigpond.net.au/robsstu ... rnbyOO.xtp
copy the files to \program files\xtrkcad\params
in XtrkCad go to Files, Parameter Files and browse for HornbyHO.xtp and HornbyOO.xtp
lots of Hornby things will appear on your tool bar.
I have this engine like the picture GWR 0-6-0 Pannier tank
Check out Andrew's layout Hookstoke Junction UPDATED! Should do more work as it's now the Easter Holidays After the holdiays are over, my layout won't get updated much Age = 15
Check out Andrew's layout Hookstoke Junction UPDATED! Should do more work as it's now the Easter Holidays After the holdiays are over, my layout won't get updated much Age = 15
Re: Some NRM Xtrkcad threads condensed into one
The post by Ironduke rob himself lower down on the first page contains new links that work:
view the original post here
Here's the OO file
Here's the HO file
view the original post here
Here's the OO file
Here's the HO file
Last edited by tuxychuff on Thu Apr 29, 2010 5:28 pm, edited 3 times in total.
Re: Some NRM Xtrkcad threads condensed into one
A) Thank you to rob for coming in and sorting everything out there
B) In the OO file the curved points didn't seem to be the right size
I tried using it in a layout that I know works in real life (with tight fitting joins) and and they wouldn't fit.
has anyone else had these problems? or is it my computer?
sorry it isn't possible to put the xtc file on here
but here's a bitmap output of it:
http://www.newrailwaymodellers.co.uk/Fo ... hp?id=2926
B) In the OO file the curved points didn't seem to be the right size
I tried using it in a layout that I know works in real life (with tight fitting joins) and and they wouldn't fit.
has anyone else had these problems? or is it my computer?
sorry it isn't possible to put the xtc file on here
but here's a bitmap output of it:
http://www.newrailwaymodellers.co.uk/Fo ... hp?id=2926
- Ironduke
- Posts: 1234
- Joined: Mon Sep 26, 2005 12:04 am
- Location: Ballarat Victoria Australia
- Contact:
Re: Some NRM Xtrkcad threads condensed into one
the curved points might well be wrong because I didn't have any and I couldn't work out how to make them from the hornby trackplan book so I used a ruler and scaled them up. Set track curved points are the spawn of the devil anyway. See if you can make them yourself.
Regards
Rob
Rob
-
- Posts: 374
- Joined: Tue Jul 10, 2007 10:57 pm
- Location: Stone, Staffordhshire, England
- Contact:
Re: Some NRM Xtrkcad threads condensed into one
Sorry to bring up an old thread!
I haven't used XTrkCAD in ages and ive opened up an old file of mine: I would like to know how to get a snapshot as such of the plan? I have tried to export as a bmp but I can't seem to get the export to look like this: And how do I get rid of the pink track? And just make it the same as the rest?
Kind Regards
Edward
I haven't used XTrkCAD in ages and ive opened up an old file of mine: I would like to know how to get a snapshot as such of the plan? I have tried to export as a bmp but I can't seem to get the export to look like this: And how do I get rid of the pink track? And just make it the same as the rest?
Kind Regards
Edward