Finally got round to getting turntable out
Just getting error one.
Cleaned contacts and rings still the same.
Taken the base plate off the turntable an checked continuity to the pins in the well.
I have one pin on the plug to the well with no continuity.
Is there a wiring diagram of how the wires go into the plug
Bought it on a closing down sale so return is not an option.
Emailed heljan directly an gaugemaster but obviously won’t hear from them for few days at least.
Or if anyone in Yorkshire has the turntable working so I could test out parts on a known system even better
Turn table
Turn table
A railroad engineer must be sure not to loose his train of thought or he might go down the wrong track.
Re: Turn table
Faulty controller and pit so 2/3 bits failed unit replaced
A railroad engineer must be sure not to loose his train of thought or he might go down the wrong track.