dcc

Post Reply
casablanca
Posts: 140
Joined: Sun Aug 11, 2013 5:10 pm

dcc

Post by casablanca »

nce powercab wanted
D0260
Posts: 227
Joined: Thu Jun 11, 2009 6:55 pm

Re: dcc

Post by D0260 »

Lots on Ebay. Just watch the cost of postage if you order from Trumpland...
casablanca
Posts: 140
Joined: Sun Aug 11, 2013 5:10 pm

Re: dcc

Post by casablanca »

What i ment to say i want only the powercab hand throttle i have the rest my throttle decided to give up the ghost on inspection one of the wires inside had broken off hence no repair unless someone sells the pb board which i think is a long shot
User avatar
End2end
Posts: 6010
Joined: Sun Jan 12, 2014 9:58 pm
Location: At the end....... and sometimes at the other end

Re: dcc

Post by End2end »

Can you not get it repaired rather than buy a new one?
Thanks
End2end
"St Blazey's" - The progress and predicaments.
Welcome‎
Planning
Building
St. Blazey's Works & Depot thread
User avatar
Flashbang
Posts: 4092
Joined: Thu Oct 18, 2007 1:07 pm
Location: SE United Kingdom
Contact:

Re: dcc

Post by Flashbang »

Assuming you are UK based contact Coastal DCC https://www.coastaldcc.co.uk/index.php who may be able to repair or suggest a repairer. Otherwise contact NCE in the USA https://www.ncedcc.com/
[Image << Click the Icon to go to my website
Broken? It was working correctly when I left it.
casablanca
Posts: 140
Joined: Sun Aug 11, 2013 5:10 pm

Re: dcc

Post by casablanca »

No it was unrepairable i just ditched it however i have now bought another for the price of £150 just the job no more looking and searching for the cheapest you would look and look but there are few about and the price is stupid Coastal are asking £180 but have none Hattons £160 have none all suppliers say same waiting for stock and that price dos not include postage
User avatar
Flashbang
Posts: 4092
Joined: Thu Oct 18, 2007 1:07 pm
Location: SE United Kingdom
Contact:

Re: dcc

Post by Flashbang »

Glad you have replacement PowerCab.
As these are imported from the USA, new supplies will be at near zero currently. The price hike has to be due to the £ to $US being low .
[Image << Click the Icon to go to my website
Broken? It was working correctly when I left it.
casablanca
Posts: 140
Joined: Sun Aug 11, 2013 5:10 pm

Re: dcc

Post by casablanca »

i need a chassis for a Bachmann 9 f cheap please as funds are low
Post Reply