Discuss Heljan Model Railway products and related model railway topics here.
The small motor mentioned above will run on cheaper decoders. At a friend's insistence I hardwired one of the Hatton's decoders into an O2 2-8-0, and it is still going after more than a year. No amount of adjustment could eliminate some 'granularity' in dead slow movement, but that excepted it runs well enough. (The same type of decoder in his old Heljan 47 - he moved to DCC quite recently - lasted about fifteen minutes, no surprises there as the motor wanted around 500mA when running, and a lot more at stall. It then got a Lenz Standard, and is fine.)
Hi Bigmet. I rather suspected the Zimos did have overload protection, but haven't checked the manuals. I have a few Zimo decoders in use and like them a lot.
I deliberately did not mention Heljan steam as I have absolutely no experience with them.
I did cook one decoder's lighting circuits on a Heljan class 47, using a Digitrax decoder. The motor circuits remained fully operational, but the lights just remained on at one end, regardless of the direction or any lighting CV adjustments.
Who is online
Users browsing this forum: No registered users and 0 guests