Only one very small step today .....
Glued and painted part of the matchstick 'timber' crossing. The unpainted section glued together tonight
will be sanded, glued in place and painted tomorrow.

Of note here is the huge gap between a full length coach and platform that results from putting a platform in a tight
radius not much tighter than second radius. No "Mind the Gap", more like pass the ladder !!
Short 4 wheel coaches are O.K .... ish !!
If you look closely you'll see the gaps are not equal on the outer tracks 'filler' section. This was found to be necessary
to enable tweeked Dapol 6 wheel milk tankers to pass through. I had by this time fixed the inner tracks 'filler' which
means I'll either have to exclude 6 wheel tanks from that track, or trim away the outer edge to increase the flange gap.
Why do Dapol 6 wheel tanks need tweeking ? - Because they will de-rail on most set track points and often fall off on
1st radius curves. By reducing the B2B for the central axle equally & by a small amount they WILL work O.K.
Geoff T.