Connector i.d please

Basic electrical and electronics, such as DC/Analog control.
User avatar
Dugie Diesel
Posts: 83
Joined: Thu Mar 19, 2009 10:47 am

Connector i.d please

Postby Dugie Diesel » Fri Apr 08, 2011 10:46 am

Hi all, can anybody tell me what the correct name for the small white connecting plugs are for the headlights in a Bachmann class 66 (the ones in the top of the cab) The reason im asking is i was hoping to find something similar to make a connection between a 0-6-0 and its tender, im hoping to add additional pick-ups but be able to disconnect for servicing etc. Ive tried researching them on eBay etc but all i can find is big stuff. Any other suggestions would be welcome too :)
Don't mess with my Choo Choo.......

User avatar
Flashbang
Posts: 3874
Joined: Thu Oct 18, 2007 1:07 pm
Location: SE United Kingdom
Contact:

Re: Connector i.d please

Postby Flashbang » Fri Apr 08, 2011 3:36 pm

[Image << Click the Icon to go to my website
Broken? It was working correctly when I left it.

noel
Posts: 435
Joined: Sun Dec 23, 2007 1:27 pm

Re: Connector i.d please

Postby noel » Fri Apr 08, 2011 5:13 pm

+

Buying just one small plug could be expensive.

Have you considered making your own with a piece of fine brass tube
and a piece of brass rod that gives a sliding fit.

Slightly crimp the tube to give an tight fit for the rod, and sheath the
tube with styrene tube for insulation.

MEK the two sheaths together. A third dummy pin would allow you to
polarize the connection if you are duplicating the pick-up of the loco itself.

+

User avatar
Bufferstop
Posts: 12980
Joined: Thu Mar 11, 2010 12:06 pm
Location: Bottom end of N. Warks line

Re: Connector i.d please

Postby Bufferstop » Fri Apr 08, 2011 6:39 pm

Have a look around some computer junk, their are usually an number of miniature connectors on the board of a failed disk drive.
Growing old, can't avoid it. Growing up, forget it!
My Layout, My Workbench Blog and My Opinions

Martin71
Posts: 160
Joined: Mon Apr 16, 2007 8:47 am
Location: Perth WA

Re: Connector i.d please

Postby Martin71 » Sun Apr 10, 2011 6:00 am

Hi
If their are the ones I think you mean the brand name is" Molex" Hornby and Dapol also use them. The come in a 2 pin and up to 9 pin that I have seen in locos so far. I make my own molex plugs, as I have the special crimp which does the pins down to 1.25mm.

So many on ebay but here is the tool.

http://cgi.ebay.co.uk/Micro-Crimp-Crimp ... 469wt_1139

Hope that helps

Martin


Return to “Electrical & Electronics”

Who is online

Users browsing this forum: No registered users and 1 guest