Bluetooth DC Control.

Have you stumbled upon something really cool and new in model railway. Share it with us.
User avatar
Mountain
Posts: 2879
Joined: Mon Oct 24, 2016 3:43 pm
Location: Somewhere in Wales, UK.

Re: Bluetooth DC Control.

Postby Mountain » Mon Feb 12, 2018 7:19 pm

It reminds me a bit about the way the Deltang radio control system works where the controller has to be paired with the receiver.
Enjoying 7mm narrow gauge.

MickleoverTestTrack
Posts: 56
Joined: Tue Mar 28, 2017 12:54 am
Location: Derby

Re: Bluetooth DC Control.

Postby MickleoverTestTrack » Mon Feb 12, 2018 7:55 pm

I like the idea of self containment for a garden railway. If I ever get around to putting a line around my garden I would limit the number of locos that can run on it and use bluetooth and on-board battery power to save reliance on the rails. Hopefully the implimentation will be a bit more advanced by then.

User avatar
flying scotsman123
Posts: 2020
Joined: Thu Jan 12, 2012 5:29 pm
Location: err, down there round the corner... not that one!!!

Re: Bluetooth DC Control.

Postby flying scotsman123 » Mon Feb 12, 2018 8:11 pm

MickleoverTestTrack wrote:I like the idea of self containment for a garden railway. If I ever get around to putting a line around my garden I would limit the number of locos that can run on it and use bluetooth and on-board battery power to save reliance on the rails. Hopefully the implimentation will be a bit more advanced by then.


I've been surprised how reliable contact is on the larger scales outside though. Even if I haven't run anything since last summer, the only thing I have to do is remove any leaves or other obstacles, plonk the loco on and off it goes. Track is a mixture of Peco and Piko.
"listen carefully, i shall say this only once"

Image

User avatar
Mountain
Posts: 2879
Joined: Mon Oct 24, 2016 3:43 pm
Location: Somewhere in Wales, UK.

Re: Bluetooth DC Control.

Postby Mountain » Mon Feb 12, 2018 8:37 pm

Though I've never had it myself, I've been impressed with G scale in the ability to get track power, especially the budget locos with the track pickups. One model trainshop had one running on a shelf continually for two and a half years (At the time I saw it) and he never once cleaned the rails. He had the cheapie G scale four wheel loco that went back and fore on a shelf with a shuttle unit. It ran impressively quiet. It was a Gaugemaster shuttle unit so the loco would do a dead stop at either end. I couldn't believe it when he said it had done it for two and a half years!
Enjoying 7mm narrow gauge.

User avatar
Emettman
Posts: 2327
Joined: Fri Jun 20, 2014 4:43 pm
Location: Cornwall UK
Contact:

Re: Bluetooth DC Control.

Postby Emettman » Mon Feb 12, 2018 9:28 pm

Mountain wrote: I couldn't believe it when he said it had done it for two and a half years!


*The* motor block for that was the original Playmobil track powered unit (made by LGB)
Quiet and utterly reliable. Pick up on all four wheels plus two wipers (1 wheel with traction tyre)

I still have a few of those brand new pugged away.


However, if starting again in the garden I'd almost certainly go for battery power with 2.4 Ghz radio control.
The main reason being the sheer cost of metal rail points and track!

Chris
"It's his madness that keeps him sane."

GWR_fan
Posts: 4807
Joined: Sun Apr 29, 2012 11:57 pm
Location: Antipodes

Re: Bluetooth DC Control.

Postby GWR_fan » Mon Feb 12, 2018 10:02 pm


b9y
Posts: 52
Joined: Sat Jan 13, 2018 6:22 pm

Re: Bluetooth DC Control.

Postby b9y » Mon Feb 19, 2018 12:14 am

Oh yea this is similar to DCC though, so you have to fit something to the loco.

MickleoverTestTrack
Posts: 56
Joined: Tue Mar 28, 2017 12:54 am
Location: Derby

Re: Bluetooth DC Control.

Postby MickleoverTestTrack » Mon Feb 19, 2018 8:18 pm

The Bachmann EZ one does seem to be the Bluerail items rebranded.

GWR_fan
Posts: 4807
Joined: Sun Apr 29, 2012 11:57 pm
Location: Antipodes

Re: Bluetooth DC Control.

Postby GWR_fan » Tue Feb 20, 2018 4:13 am

As far as I am aware the Bluerail system does not require a standalone controller as DCC does. All control is via bluetooth using the app on your device. A constant power source is applied to the rails. Basically, the onboard device is a digital decoder with an integral bluetooth receiver. I believe a standalone receiver will be offered to enable one to convert a typical digital loco to being able to receive bluetooth signals.


Return to “New discoveries???”

Who is online

Users browsing this forum: No registered users and 1 guest