Flashbang wrote:TS... The lowering sequence isn't quite correct, both AHB barrier booms lower together not one after the other.
Its only on full barriers that the approach two barriers lower then once proved down the trailing (exit) two lower.
Also, though often not modelled, when the yellow light extinguishes the red lights all come on for around 0.5 second followed by them flashing. Flashing is all left hand red lights on together then all right hand red lights on and so on. Called a Wig Wag sequence.
Now you need the warbling (Yodel alarm) pedestrian warning tone added
Hi Flashbang, I am planning for a full (4 barrier) crossing, the sim only shows two servo's, but two servo's would be paired diagonally, the picture does show only one side of the crossing, entrance and exit (the second side has yet to be built ).
I did note all red start on, I suppose I will have to add another line of code
Always left red duly noted! (that's just down to good wiring practice and selecting the correct channel)
The blue alarm is the audio output (to an MP3 player card)