Powering points

Post all your model railway electronic problems, solutions and discoverys here.
Post Reply
User avatar
Jack Middleton
Posts: 158
Joined: Wed May 20, 2009 9:25 am

Powering points

Postby Jack Middleton » Thu May 31, 2012 4:09 pm

Could I use a generic power transformer for powering points? Say if I found one with an AC output of 1A at 16V? As the controller I have doesn't have an accessory output.
Top
User avatar
Roger (RJ)
Posts: 1442
Joined: Tue May 29, 2007 2:59 pm
Location: Nottingham, UK.

Re: Powering points

Postby Roger (RJ) » Thu May 31, 2012 4:12 pm

Yes, as long as it's safely insulated and constructed. Don't try to use a bare transformer on it's own, it would be extremely dangerous.
Top
User avatar
Jack Middleton
Posts: 158
Joined: Wed May 20, 2009 9:25 am

Re: Powering points

Postby Jack Middleton » Thu May 31, 2012 4:15 pm

Thanks :)
Top
User avatar
Roger (RJ)
Posts: 1442
Joined: Tue May 29, 2007 2:59 pm
Location: Nottingham, UK.

Re: Powering points

Postby Roger (RJ) » Thu May 31, 2012 4:16 pm

This would be OK LINK
Top
Post Reply

Return to “Electronics”

Who is online

Users browsing this forum: No registered users and 4 guests