metcalfe brick terrain & suitable paint

Having a problem making your model railway layout look real. Post questions and share the results of your model railway scenery here.
aleopardstail
Posts: 85
Joined: Thu Apr 29, 2021 9:48 pm

metcalfe brick terrain & suitable paint

Postby aleopardstail » Fri Jul 16, 2021 3:22 pm

Have just tried painting the white edges of a bit of the Metcalfe brick print (where it won't show), have found the "dark red" from Vallejo is a bit too dark and a bit too red.

has anyone got any recommendations from their range for a brick red and a brick blue that are not bad matches for this sort of thing?

User avatar
Ironduke
Posts: 1240
Joined: Mon Sep 26, 2005 12:04 am
Location: Ballarat Victoria Australia
Contact:

Re: metcalfe brick terrain & suitable paint

Postby Ironduke » Sat Jul 17, 2021 12:30 am

I often use Vallejo in a paint pallet and mix the colour to achieve the shade I want.
Image
Regards
Rob

Evaret
Posts: 24
Joined: Sat Jan 17, 2009 8:46 am
Location: Sunshine Coast, Queensland

Re: metcalfe brick terrain & suitable paint

Postby Evaret » Sat Jul 17, 2021 1:27 am

I have found that the color of the Metcalfe kits can change slightly fromm one batch to another. Also living in Australia I don't have access to may of the brands forund in the UK.

My solution has been to use watercolour pencils. You can use the pencil as a pencil! But my approach has been to shave some from the end and apply with a damp fine point brush. The brush needs to be just damp to touch; too wet and the paint runs

I have a selection of pencils. A couple you might try for the red brick are Derwent Terracotta 64 or Faber Castell Albrect Durer Indian Red 8200-192.

Good luck on your quest

aleopardstail
Posts: 85
Joined: Thu Apr 29, 2021 9:48 pm

Re: metcalfe brick terrain & suitable paint

Postby aleopardstail » Sat Jul 17, 2021 2:20 pm

Ironduke wrote:I often use Vallejo in a paint pallet and mix the colour to achieve the shade I want.
Image


often mix when painting other models, usually shade and highlight effects, just wondered if there was a halfway good base to slightly lighten or darken


Return to “Scenery”

Who is online

Users browsing this forum: No registered users and 4 guests