McBuffys projects

What are you up to on your workbench
User avatar
Mountain
Posts: 3689
Joined: Mon Oct 24, 2016 3:43 pm
Location: Somewhere in Wales, UK.

Re: McBuffys projects

Postby Mountain » Tue Oct 16, 2018 8:49 pm

Very good. At first as the pictures slowly loaded up I thought it was a 12" to the ft scale. :D

User avatar
Chops
Posts: 283
Joined: Mon Oct 08, 2018 8:25 am

Re: McBuffys projects

Postby Chops » Tue Oct 16, 2018 9:40 pm

Exquisite. I continue to be amazed at the quality of these card stock kits. Practically unheard of in the US.

Back in the '70's, a firm called "Suydam" made some kits, largely composed of card stock. They were quite primitive by comparison, so when I first started hearing about card stock, I was like, "huh???"
I don't care what they say. I believe in Nessie.

BuffyMcBuffer
Posts: 97
Joined: Sun Apr 01, 2018 12:59 pm

Re: McBuffys projects

Postby BuffyMcBuffer » Thu Oct 25, 2018 10:35 pm

well some more projects been knocked out

hopefully these will help with the cables going round corners for the manual switches

Image

Image

Image

next was finding these laying about at work and the idea hit me right away soo

Image

marked out

Image

snip snip

Image

and thats all for the projects part. think they are going on the back burner for a while as i am focusing on getting the "play area" sorted out as it is a mess

BuffyMcBuffer
Posts: 97
Joined: Sun Apr 01, 2018 12:59 pm

Re: McBuffys projects

Postby BuffyMcBuffer » Mon Mar 04, 2019 9:05 am

it's a sad day, one on the buildings has been deemed unfit for purpose by the local authority and had to be knocked down...............

Image

the reasons were it has been left unattended for sooo many years (months) it was a hazard, demolition company came in yesterday and started work, the site manager did say he can salvage some of the build

(excuse the mess on the floor. Local street cleaners are on strike....)

BuffyMcBuffer
Posts: 97
Joined: Sun Apr 01, 2018 12:59 pm

Re: McBuffys projects

Postby BuffyMcBuffer » Mon Mar 04, 2019 8:31 pm

Right I need some guidance please

I have these platforms I got from a job lot purchase last year,

They are airfix but a lot of the legs have broken (which I can solve that issue)

The issue I have is there is only one side to the platforms. Now I want to convert them to have both sides there, however I don’t want to destroy the other ones to make a set so would I get the same effect if I use brick faced plastic card and did some scratch build to make them the same??

Or has anyone else got a better idea??

Much appreciated

Image

Image

BuffyMcBuffer
Posts: 97
Joined: Sun Apr 01, 2018 12:59 pm

Re: McBuffys projects

Postby BuffyMcBuffer » Tue Mar 05, 2019 8:53 pm

Problem solved just figured it out as it was much simpler than I thought

Ordered a sheet of finescenes 401 and 404 plasticard from this forums website shop

And popped into the local model shop to grab some evergreen strip which turned out to be the right size (no a bad guess) i could have got those plasticards from the local shop as well but seen as it was my first time in there I now know I can get parts quickly and at about the same price roughly as online

Image

Also knock another set of boards up at work today as I’m going to change one for these and have a bridge across

Image

Image

BuffyMcBuffer
Posts: 97
Joined: Sun Apr 01, 2018 12:59 pm

Re: McBuffys projects

Postby BuffyMcBuffer » Mon Mar 25, 2019 10:37 am

So plasticard turned up and it turns out i needed the 401

Image

and this was the 404

Image

cut into strips and dry fitted to see fit

Image

Image

Image

looks good so far

strengthen the back of the walls up

Image

Image

tried to put paint on but turned out crap so i primed them with Poundland primer

Image

got some primer spray on the walls outside so also knocked up a little spray booth for me (no pics unfortunately)

painted up

Image

tried my hand at weathering the platforms......

Image

Image

Image

decided i was wasting my time as my little boy would be interested in that much fine detail

needed more legs for the board bases i have made so knocked these up at work

Image

T shaped to save space/weight

next tried my hand at scene modelling.....

Image

Image

turned out meh

popped to shops and saw these in Poundland (good for fences)

Image

also looked for a fine mesh sieve but nothing i saw then saw a splash guard.....

cut a pot up and hot glued onto mesh and voila (now waiting to fly zapper to arrive as there wasn't any in the shops)

Image

Image


Return to “The Workbench”

Who is online

Users browsing this forum: No registered users and 1 guest