Bachmann EZ Command, Missing Red Lead

[fholred]

I've just been given an Bachmann EZ Command but it is missing the red lead to connect the controller to the track. Does anyway know where i can get from? , already looked around the usually places but no look

[Suzie]

It is just a stereo 3.5mm jack plug, so should be easy to make one up. The same cable is used with the DC controllers, so someone might have a discarded lead with a trainset controller that is no longer used.

Suzie x

[fholred]

Could you then just get a lead with 3.5mm jack plug on one end and strip the other and solder to the track, would that work?

[kebang]

Be Careful! many made up leads with 3.5 jacks are only designed for audio use. The amperage from the EZ Command could easily melt the insulation on the wire and cause a fire.

[trainlover23]

Why not try a local model shop and ask for part no 36-611 or is that to easy

[dubdee1000]

Why not try a local model shop and ask for part no 36-611 or is that to easy

*too

[trainlover23]

Why not try a local model shop and ask for part no 36-611 or is that to easy

*too

TA

[thebritfarmer]

http://www.hattons.co.uk/107503/Bachman ... etail.aspx