Here is a few pictures of my first weathering project for a steam locomotive, using the DCC Concepts Weathering Powders. It only took about Half and Hour, compared to my first ever weathering job which took me 3 hours for some reason. Still they are all worth it. It's the Bachmann 3MT Tank, I found a picture of a weathered Bachmann 4MT Tank in a Artical about layout maintnce in this months Hornby Magazing, and thought it looked good. As the 3MT in virtualy the same, I decided to have a go.

This is one of the side water tanks and pistons

One of the Bunker and cab entrence

One showing the whole side of the locomotive

One of the front end and around the boiler

And Finaly, one of inside the Smokebox. You might wonder why I weathered inside the smokebox, but it's to make the boiler tubing look rusty.
So Those are all the pictures
Jacob
