Coppenhall Goods (Late Crest) 00

Post pictures and information about your own personal model railway layout that is under construction. Keep members up-to-date with what you are doing and discuss problems that you are having.
User avatar
railwayjim
Posts: 731
Joined: Tue Sep 02, 2014 7:46 am
Location: Sunny Fleetwood by the sea

Re: Coppenhall Goods (Late Crest) 00

Post by railwayjim »

The new canopies and lighting look excellent, really looking the part now.

Keep the updates coming! Forget the decorating!

Jim.
Tom@Crewe
Posts: 306
Joined: Sat Aug 18, 2012 11:05 am
Location: Crewe

Re: Coppenhall Goods (Late Crest) 00

Post by Tom@Crewe »

Decorating finished. Dapol signal box arrived.
Never enough time...........

Coppenhall Goods https://www.newrailwaymodellers.co.uk/F ... 22&t=50174
Tom@Crewe
Posts: 306
Joined: Sat Aug 18, 2012 11:05 am
Location: Crewe

Re: Coppenhall Goods (Late Crest) 00

Post by Tom@Crewe »

Just under 2 weeks ago, I had a clean up and was running the layout, or should I say wanted to!
I had to get under the layout and look at two seep's, one not switching the frog and the other just dead.
I have never been totally happy with them, so now 14 seep's are in the bin.

Seep's gone - Switches gone - Legend gone.

Image Image Image
Never enough time...........

Coppenhall Goods https://www.newrailwaymodellers.co.uk/F ... 22&t=50174
Tom@Crewe
Posts: 306
Joined: Sat Aug 18, 2012 11:05 am
Location: Crewe

Re: Coppenhall Goods (Late Crest) 00

Post by Tom@Crewe »

New point control starting to go in...

Image Image
Never enough time...........

Coppenhall Goods https://www.newrailwaymodellers.co.uk/F ... 22&t=50174
Tom@Crewe
Posts: 306
Joined: Sat Aug 18, 2012 11:05 am
Location: Crewe

Re: Coppenhall Goods (Late Crest) 00

Post by Tom@Crewe »

Its been a while again, I finished fitting the servo's to the points and tested them, I have used the Megapoints system. Then the wife and I decided to have a change around so the layout was moved to a new room Which is a little large and wife claimed the smaller one. I have now got the layout rebuilt and was about to fit micro switches to control the frogs but discovered that Megapoints do a relay control for the frogs, so that is now installed. With the larger room I have room for a better I am now pleased the railway is up and running. More scenic work to do.

Image

Image

Image

Next project a Signal Box

Image
Never enough time...........

Coppenhall Goods https://www.newrailwaymodellers.co.uk/F ... 22&t=50174
User avatar
TimberSurf
Posts: 2536
Joined: Wed Jan 08, 2014 5:47 pm
Location: N.Wales
Contact:

Re: Coppenhall Goods (Late Crest) 00

Post by TimberSurf »

Hi
Only just found your thread, but very interesting, as I am on a similar path (NCE, Megapoints, lighting,etc)
I do like your "lit" low profile factory, that one hadn't crossed my mind yet.
That area above your PC is begging to become a traverser! :D
Here is some inspiration for your signal box

viewtopic.php?f=22&t=48617&p=633854#p632894
viewtopic.php?f=22&t=44849&start=150#p630755
viewtopic.php?f=22&t=44849&start=135#p629367
Image
Lumsdonia <--- Hit link to go to my website for full story and wiring advice!
Tom@Crewe
Posts: 306
Joined: Sat Aug 18, 2012 11:05 am
Location: Crewe

Re: Coppenhall Goods (Late Crest) 00

Post by Tom@Crewe »

More progress on the Signal Box and its Foundations you will see what I mean in the pictures, I had to get a Dapol Signal Gantry and have now ordered a second. Its coming together well.

Image
Image
Image
Never enough time...........

Coppenhall Goods https://www.newrailwaymodellers.co.uk/F ... 22&t=50174
Tom@Crewe
Posts: 306
Joined: Sat Aug 18, 2012 11:05 am
Location: Crewe

Re: Coppenhall Goods (Late Crest) 00

Post by Tom@Crewe »

A little bit more done on the elevated signalbox.

Image
Never enough time...........

Coppenhall Goods https://www.newrailwaymodellers.co.uk/F ... 22&t=50174
Tom@Crewe
Posts: 306
Joined: Sat Aug 18, 2012 11:05 am
Location: Crewe

Re: Coppenhall Goods (Late Crest) 00

Post by Tom@Crewe »

Finished for now I am sure I will come back and tinker a little, Telegraph wires, Point rodding, Point Cabling.

Image
Never enough time...........

Coppenhall Goods https://www.newrailwaymodellers.co.uk/F ... 22&t=50174
Tom@Crewe
Posts: 306
Joined: Sat Aug 18, 2012 11:05 am
Location: Crewe

Re: Coppenhall Goods (Late Crest) 00

Post by Tom@Crewe »

Its been a while since I updated this thread what with one thing and another.
I have got some new rolling stock and tried weathering a few. But need to get some more done scenic wise.

Image
Image

Image
Image

Image
Never enough time...........

Coppenhall Goods https://www.newrailwaymodellers.co.uk/F ... 22&t=50174
Tom@Crewe
Posts: 306
Joined: Sat Aug 18, 2012 11:05 am
Location: Crewe

Re: Coppenhall Goods (Late Crest) 00

Post by Tom@Crewe »

I have not done much since last post but started tinkering again, There is one thing I must look at but have been avoiding that's signalling (I know nothing).

My layout is Late crest around 1960-64. I know that a change over from semaphore to light signal's was around this time but what about on good/parcel yards? Maybe a mixture and ground signals?

I have here a layout plan where and which type would have been used?

Image

Brown is platforms and shed, grey is hard standing and green is back scene, top right is to fiddle yard.
Never enough time...........

Coppenhall Goods https://www.newrailwaymodellers.co.uk/F ... 22&t=50174
User avatar
manna
Posts: 1123
Joined: Mon May 31, 2010 10:13 am
Location: S Aust or Qld

Re: Coppenhall Goods (Late Crest) 00

Post by manna »

G'Day Gents

Seeing that, as you say a goods yard, very few signals are needed, the exit out of the yard, by the tunnel, and a couple of ground signals to protect the running lines.

The shunters would know the times of trains entering and exiting the yard and would work around the timings.

manna
EDGWARE GN. Steam in the Suburbs
User avatar
luckymucklebackit
Posts: 3712
Joined: Mon Jul 18, 2011 7:05 am
Location: Eaglesham (Again)
Contact:

Re: Coppenhall Goods (Late Crest) 00

Post by luckymucklebackit »

Really high standard of modelling there, like this layout a lot.

Jim
This Signature Left Intentionally Blank, but since I have written this and I intended to do it, this Signature is intentionally not blank. Paradox or What?
My layout - Gateside and Northbridge
Image
Tom@Crewe
Posts: 306
Joined: Sat Aug 18, 2012 11:05 am
Location: Crewe

Re: Coppenhall Goods (Late Crest) 00

Post by Tom@Crewe »

manna wrote: the exit out of the yard, by the tunnel, and a couple of ground signals to protect the running lines.
But which signals and where?
Never enough time...........

Coppenhall Goods https://www.newrailwaymodellers.co.uk/F ... 22&t=50174
User avatar
manna
Posts: 1123
Joined: Mon May 31, 2010 10:13 am
Location: S Aust or Qld

Re: Coppenhall Goods (Late Crest) 00

Post by manna »

G'Day Gents
I've put some numbers, where I think, the signals should go.

No. 1, this would be a mainline type signal, Home and Distant, with a small sub signal to allow shunting into the sidings to the right of the tunnel.

No. 2 A small sub signal (dollie) to protect the headshunt and sidings to the left.

No. 3 Again, to protect the headshunt. (stop you from running into something)

No. 4 To protect the exit line, another small sub signal.

This is the best I could come up with, as I don't know of any yards with this type of complexity, so I have used a logical signal layout, it also breaks the yard up into four parts. This allows you four yard shunters, plus larger goods loco to arrive and depart.


manna
Attachments
42460605882_c81cdb7c63_o.jpg
EDGWARE GN. Steam in the Suburbs
Post Reply