Page 2 of 2
Posted: Sun Mar 02, 2008 1:45 pm
have been coming up with a few ideas for a logo
what do you all think
i think i will do a couple more with possibly a 158 and a 170
p.s. they were drawn from scratch on MS Paint
Posted: Sun Mar 02, 2008 4:26 pm
finished the third design
100th post YAY!!!!!
Posted: Sun Mar 02, 2008 5:52 pm
sorry to bore veryone with logos but here is one more
i will have an update soon but i am currently broke
also i still need a name
Posted: Sun Mar 02, 2008 5:57 pm
forgot to add, would it be wiser to choose code 55, as they seem to have better pointwork e.g. scissors crossing
Posted: Sun Mar 02, 2008 10:43 pm
Being as the models you're using are all going to be newer releases, theres no benefit at all from using code 80 track, saying that, almost all older models run on code 55 any way.
The greater variety of pointwork in code 55 and much finer track profile says it all
One point to note though, the rail top sits a little lower, so you may want to raise the track up (on cork or card) to bring it back up to a reasonable height for the platforms, otherwise the platform edge could well sit too close to the bottom of the doors.
Posted: Sun Mar 02, 2008 11:16 pm
thanks will bear that in mind
Posted: Mon Mar 03, 2008 8:54 pm
decided to that the current plan will be aquard to lay and that the platforms are only 2cm wide so can anybody suggest a prototype i can base a new track plan on that has 2/3 platforms and wagon storage or loco depot.
n gauge terminus - need new ideas page 2
Posted: Mon Mar 03, 2008 9:11 pm
or a layout that is a double terminus for a heritage railway and the mainline