Hi from Australia

Welcome to New Railway Modellers Forum. Read the Introduction and Terms and conditions of New Railway Modellers model railway forum. Introduce yourself to the members in this section.
User avatar
Mountain
Posts: 2480
Joined: Mon Oct 24, 2016 3:43 pm
Location: Somewhere in Wales, UK.

Re: Hi from Australia

Postby Mountain » Tue Jun 12, 2018 12:20 am

I didnt join for a few years because I assumed I had to be new to the hobby. Then I thought to join so that I could help others. (Though others also help me on occasions even if it is just an encouraging word).
See below ↓

Puffingbill
Posts: 16
Joined: Thu May 24, 2018 4:11 am

Re: Hi from Australia

Postby Puffingbill » Tue Jun 12, 2018 3:43 am

Hi and welcome from another new member, also an expat lad from Longbridge Birmingham but now living between Brisbane and the hell hole they call the Gold Coast :D , I am a freelance modeller that has a British layout but runs whatever takes my fancy.

Electraman
Posts: 22
Joined: Sat Jun 09, 2018 4:25 pm

Re: Hi from Australia

Postby Electraman » Tue Jun 12, 2018 4:17 pm

Hi Everyone,
Thanks for the welcome.
Thanks for the Hattons Link.
The 10% helps may help but I've been cheeky and asked for VAT free. I don't see why I should pay it, what with Brexit and the Conservatives.
I'm going to with the Smart Switch technology for the DCC/PC control.
The selling G scale Exchange Rate with buying ON30 is very good.
The Bachmann is of course is all trump outline, tho the bachmann Climax can be somewhat Australianised. I've made enquiries with Haskell's in Taiwan, because they build ON30 NA Class Puffing Billy Loco's. I've asked if they would do a custom colour one off. Blue.
I still like Austrian outline too.
I've never been to Brisbane. Your heat is wetter than ours. Our's is incredibly dry.
Gold coast, I've heard of it. Where drunk boys puke and fight everywhere and young girls fall off high balconies.
I live in a village of about 700 people.
In a couple of months I am moving to Wagga Wagga, tho it's referred to as just Wagga. It's the largest town in the Riverina, as opposed to the deadest village. Ten minutes from a major hospital in Wagga. Locally it's not a big hospital and it is about an hour away. In the last year, 8 times they take me to the local Hospital and 8 times they put me on an Air Ambulance and send me to Melbourne. I'm getting a shed, and from that shed I'm getting an indoor space, but I'm also going to run trains outside too, when the weather is ok.
I don't live in a shed, I live and will continue to live in my modified caravan. The caravan will go in the shed too. The shed is big enough.
I'm kind of impatient now, so when I sell stuff, I do retail therapy.
I've been working on the plans so I get some clue as to what I need to buy.
Thanks everyone for the welcome and Tips. For me G scale was simple. ON30 means a bit more thought into what I want to do with it. I tend to follow the less is more approach, tho there is some leeway. Basically there will be 2 stations, one is me, and the other is with my Housemate on the back veranda of the house. It will be part time manned. the distance between these 2 stations works out at about 55Mtr, or 180Ft in old money.

It's less of a Grand plan and more of an Eccentric one.

Pete.
I added a couple of attachments, the ON30 NA and the colour Blue.
Attachments
historic-train-running-backwards-darjeeling-himalayan-railway-narrow-CRE1JY.jpg
haskell taiwan.jpg

Puffingbill
Posts: 16
Joined: Thu May 24, 2018 4:11 am

Re: Hi from Australia

Postby Puffingbill » Tue Jun 12, 2018 8:40 pm

Hi Electraman I hope your move to Wagga works out well and if you need a rest from the trains you can always catch yourself a nice Freshwater Crayfish in the Murmbidgee River, although I now live near Brizzy I spent 30 years living in Victoria including near Belgrave the home of Puffing Billy hence my nickname Puffingbill, I spent a lot of time photographing and riding Puffing Billy which I think is the best preserved railway in Australia, good luck to you with the On30 a great gauge to model.

User avatar
Mountain
Posts: 2480
Joined: Mon Oct 24, 2016 3:43 pm
Location: Somewhere in Wales, UK.

Re: Hi from Australia

Postby Mountain » Tue Jun 12, 2018 10:33 pm

Is 0n30 the standard 7mm narrow gauge for over there or is it a case that it is convenient due to the availability of ready made models?
I'm interested as while I know 0e is the European form and 0-16.5 is the British form, and we know 0n30 is the American form... I'd just not thought about the rest of the world....
See below ↓

rainynight65
Posts: 12
Joined: Wed May 02, 2018 10:20 pm

Re: Hi from Australia

Postby rainynight65 » Wed Jun 13, 2018 5:00 am

Hey, look at all that activity in my thread :D

Puffingbill, that's not the worst place to live :mrgreen: I actually work in Brisbane but live in the countryside out west, towards Towoomba. Bit of a commute but as a bonus I regularly get to see the Class 2300 locos pull their coal trains back and forth. And whaddya know, they're coming as H0 models soon :mrgreen: My preorder is in.

Electraman, welcome too :) Hatton's is a pretty good bet, they do knock off the VAT when you order from overseas. Have had two shipments from them so far and no complaints.

Electraman
Posts: 22
Joined: Sat Jun 09, 2018 4:25 pm

Re: Hi from Australia

Postby Electraman » Wed Jun 13, 2018 1:41 pm

Hi,

So far the only adverts here tend to be ON30. 7mm is more English. 7MM is generally I think more understood by older English people Again the bulk of whats available is the Bachmann line. The NA class I've put a deposit on is more G scale price!!!Before DCC and Sound are added it's $496, where as the Bachmann well for $500 I could buy one Loco, with DCC and sound, 5 coaches and 3 Box Cars.-

I do try to buy Australian, but as we are so far away things over here can be quite expensive anyway. To be honest my health hasn't been that good for a while. Getting the Brain Aneurysm diagnosis is the icing on the cake. Frankly the money I have to live on is pretty poor. Without a disposable income, I shop carefully, and try to get better prices. In the UK you have Hatton's. Me I tend to buy from the USA. I did with G scale. Locos and rolling stock. If you want my recommendation, Train World USA.

Pete.

Electraman
Posts: 22
Joined: Sat Jun 09, 2018 4:25 pm

Re: Hi from Australia

Postby Electraman » Wed Jun 13, 2018 2:14 pm

Hi RainyNight,
It's a rainy night here! I'm afraid I know nothing about either Broad or Standard Gauge Locos, and nothing about diesels except how the engine works.
I checked out https://en.wikipedia.org/wiki/V/Line. I live in 2710 ( with an 03 Victorian telephone prefix) This is because the freight line that runs to Deniliquin is connected to the Broad gauge Victorian Network. Deniliquin is known for 2 things. It has a yearly UTE Muster, and Sun Rice have a huge processing and storage plant there, with of course the rail link. I live in Mathoura, which is about half way between Deniliquin and Echuca Moama. That railway line runs past, about 200Mtrs away through the Centre of the Village. The "Rice Train" comes through early in the Morning and another returns later in the afternoon. In the height of the season there can be upto 6 trains a day. They are long container trains pulled by 2-4 Diesels depending on whats available I suppose. The speed limit on the line is 35K. After looking at Wiki, we get N Class, A Class, P Class and Y Class. Several times I have seen other More modern units from other freight companies. Don't ask me what they might be, all I can say is big. I can tell you the Village has 4 ungated level crossings, and many more on the line, so you hear the Horn a lot. Especially in the Village!

Bigmet
Posts: 6076
Joined: Tue Aug 14, 2007 2:19 pm

Re: Hi from Australia

Postby Bigmet » Thu Jun 14, 2018 11:18 am

rainynight65 wrote:...TT in Russia was apparently 1:130.

Somewhat makes sense, as they are 1520mm gauge. A superior choice would have been 1:125, very close to true gauge and scale relationship on 12mm gauge track, and a neat metric system divisor as it is a factor of 1000, scaling at 8mm to the metre.

Notanyware
Posts: 46
Joined: Sat Oct 21, 2017 2:12 am

Re: Hi from Australia

Postby Notanyware » Sun Jun 17, 2018 9:11 pm

Hello from another Queenslander welcome to the forum.


Return to “Welcome / Terms And Conditions / Guest Book”

Who is online

Users browsing this forum: No registered users and 1 guest