Track planning with Anyrail

Any questions about designing a model railway layout or problems with track work.
bkrenderman
Posts: 5
Joined: Tue Jul 16, 2019 5:18 pm

Track planning with Anyrail

Postby bkrenderman » Tue Sep 22, 2020 8:03 am

I used Anyrail to do track planning for my Layout and here is the introduction video - https://youtu.be/eUyTRX-wXRw

User avatar
Ironduke
Posts: 1240
Joined: Mon Sep 26, 2005 12:04 am
Location: Ballarat Victoria Australia
Contact:

Re: Track planning with Anyrail

Postby Ironduke » Tue Sep 22, 2020 11:37 am

Interesting video but is this a layout you are building?
The red sections in the plan are gradients over 3%. Your trains will struggle to get up slopes over 3%. Some of the grades are over 7%.
Yellow sections are curves with less than 11" radius (28.2cm). One tight curve is 4.38cm
The clearances of track under the bridge are 3.81cm, as written in the circles. I would not go under 5cm clearance for n scale.
I like the 3D design for the girder bridge though.
Invertlogic_NScaleLayout_2x4feet_2019.jpg
Regards
Rob


Return to “Track/Layout Design”

Who is online

Users browsing this forum: No registered users and 1 guest