Search found 159 matches

by BromsMods
Thu Aug 22, 2013 7:33 pm
Forum: DCC Forum
Topic: Slow start
Replies: 7
Views: 725

Re: Slow start

Try setting CV5 at 120 and CV6 at 80.
by BromsMods
Thu Aug 22, 2013 11:16 am
Forum: DCC Forum
Topic: Slow start
Replies: 7
Views: 725

Re: Slow start

Try setting CV2 to 0. What are CVs 5 and 6 set to?

What is the current output of the ECOS to the track?

Do you have this problem with any other locos?
by BromsMods
Wed Aug 21, 2013 7:40 pm
Forum: DCC Forum
Topic: Slow start
Replies: 7
Views: 725

Re: Slow start

What make is the loco? You need to consider carefully whether a decoder reset is possible without affecting the sound project installed. It would be advisable to consult the documentation that came with the sound decoder or, if that isn't available, the retailer you bought it from before carrying ou...
by BromsMods
Sat Jun 01, 2013 12:53 pm
Forum: DCC Forum
Topic: HELP! with NCE Power Pro
Replies: 23
Views: 3392

Re: HELP! with NCE Power Pro

Fantastic! A relief that it wasn't anything more serious. I often find that problems like this that are reported have a simple solution, but most initially blame the technology!!
by BromsMods
Sat Jun 01, 2013 10:40 am
Forum: DCC Forum
Topic: HELP! with NCE Power Pro
Replies: 23
Views: 3392

Re: HELP! with NCE Power Pro

Well the problem is clearly not with the PowerPro, so it is something wrong with the layout. I'm sure it is something simple!! Have you made any changes at all to the trackwork or wiring since you last used it? You haven't left a screwdriver across the tracks by any chance???? Go for the obvious fir...
by BromsMods
Mon May 27, 2013 5:56 pm
Forum: DCC Forum
Topic: HELP! with NCE Power Pro
Replies: 23
Views: 3392

Re: HELP! with NCE Power Pro

See if it will control your locos - the short piece of track is now your main.
by BromsMods
Sun May 26, 2013 7:02 pm
Forum: DCC Forum
Topic: HELP! with NCE Power Pro
Replies: 23
Views: 3392

Re: HELP! with NCE Power Pro

But can you use the short piece of programming track as the main, i.e. connect the output from the PowerPro to that piece of track. I'm trying to ascertain whether the problem is with the unit or with the layout!
by BromsMods
Sat May 25, 2013 11:45 pm
Forum: DCC Forum
Topic: HELP! with NCE Power Pro
Replies: 23
Views: 3392

Re: HELP! with NCE Power Pro

Andrew I can't really see very much in the photo....... So let's go back to basics. Just take the two wires from the track output of the PowerPro and connect them directly to the piece of short track you have. Do NOT use the Hornby connector under any circumstances unless it is the DCC version, but ...
by BromsMods
Fri May 24, 2013 8:29 pm
Forum: DCC Forum
Topic: HELP! with NCE Power Pro
Replies: 23
Views: 3392

Re: HELP! with NCE Power Pro

What lights are illuminated on the front of the Pro-Box, Andrew?
by BromsMods
Tue Apr 30, 2013 7:57 pm
Forum: DCC Forum
Topic: Can the top speed be altered?
Replies: 8
Views: 1266

Re: Can the top speed be altered?

Which DCC system are you using?
by BromsMods
Sat Apr 27, 2013 5:12 pm
Forum: DCC Forum
Topic: Dcc fitting service
Replies: 4
Views: 855

Re: Dcc fitting service

I trust you have looked at our fitting guides page here - https://clarahost.clara.net/www.bromsgr ... m#TableTop
by BromsMods
Wed Apr 10, 2013 11:20 pm
Forum: DCC Forum
Topic: DCC Concepts with Stay Alive
Replies: 16
Views: 2363

Re: DCC Concepts with Stay Alive

Have you (a) adequately run in the motor (30 minutes in each direction should do) and (b) checked the model is correctly lubricated?
by BromsMods
Wed Apr 10, 2013 11:15 pm
Forum: DCC Forum
Topic: NCE PC interface
Replies: 1
Views: 388

Re: NCE PC interface

Just connect the interface into the cab bus from the SB3a using either a flat or curly cable - either will work.
by BromsMods
Sat Apr 06, 2013 10:45 am
Forum: DCC Forum
Topic: New to DCC
Replies: 24
Views: 2790

Re: New to DCC

Just to clarify, the latest versions of the PowerCab have a recall stack of 6, the same as other NCE systems. Those who have bought the PowerCab during the last 2 years and have registered with NCE should get a free upgrade. Those who have older systems but have also registered should also get notif...
by BromsMods
Fri Mar 22, 2013 11:43 pm
Forum: Model Railway Shop
Topic: Bromsgrove
Replies: 61
Views: 10399

Re: Bromsgrove

Well, retail part of the site has now closed. I would like to thank all of our customers for their purchases over the years and wish everyone a happy and prosperous future. I will be making some changes to the rest of the site over the next few weeks, so apologies in advance if you can't easily find...

Go to advanced search