Search found 33 matches

by Stufiley
Sun Dec 29, 2019 2:36 pm
Forum: Railway Photographs
Topic: Blackpool Trams
Replies: 1
Views: 642

Blackpool Trams

Hi, Here are some images of the Blackpool Trams from 2018. I forgot I had taken them and found them on a memory card on a camera that I have not used for a while. They were all shot near Blackpool Pleasure Beach on September 21st 2018. I think they were all out for an entusiasts day out but I'm not ...
by Stufiley
Mon Jul 23, 2018 9:19 am
Forum: Real World Railways
Topic: The last slipcoach service
Replies: 19
Views: 2018

Re: The last slipcoach service

Thank you, great find, never seen slips working before, only see pictures.
by Stufiley
Sun Apr 29, 2018 9:37 pm
Forum: Real World Railways
Topic: Flying Scotsman at Scarborough
Replies: 2
Views: 683

Flying Scotsman at Scarborough

I As the Flying Scotsman was at Scarborough not long ago I thought I'd pop down and take a few pictures. Here is a link to them: https://stusrailwayguides.weebly.com/flying-scotsman-2018.html Also at Seamer there was AFM that I have never see before, what a great machine! https://stusrailwayguides.w...
by Stufiley
Sat Apr 07, 2018 2:48 pm
Forum: General Model Railway Discussion / News
Topic: Hornby in the news today
Replies: 160
Views: 13169

Re: Hornby in the news today

I am also of the thinking that we as modellers are maybe partly to blame in how the hobby is portrayed and the lack of younger modellers. Recently I have just been to an exhibition, I won't say where as this would be unfair to all those who have put lots of effort into the show, but I did notice a c...
by Stufiley
Sun Nov 08, 2015 9:34 pm
Forum: General Model Railway Discussion / News
Topic: City of Nottingham
Replies: 6
Views: 765

Re: City of Nottingham

Hi, It should fit fine if they were both tender driven older versions. You might need to change the tender top as well from an LMS version to a BR version depending on what number Nottingham is running.

Cheers Stu
by Stufiley
Tue Jun 04, 2013 9:31 pm
Forum: General Model Railway Discussion / News
Topic: random hints and tips post
Replies: 39
Views: 4806

Re: random hints and tips post

To get stickers off of boxes etc. Don't just pull them off, heat them with a hair dryer first until the glue softens. They will then peel off with ease.
by Stufiley
Wed Apr 24, 2013 3:49 pm
Forum: General Model Railway Discussion / News
Topic: Just what is your worst ebay dud?
Replies: 51
Views: 5523

Re: Just what is your worst ebay dud?

If you use something like Photobucket for your pictures you can then post as many as you like on ebay for free. When you get to the part on ebay where you put your description, write all your text up to where you want your pictures. Open a second internet tab and findr you pictures on Photobucket. S...
by Stufiley
Thu Apr 11, 2013 2:52 pm
Forum: Hornby - including Lima, Rivarossi, Jouef, Electrotren
Topic: Hornby Triang 0-4-0 Axle/Wheel swap?
Replies: 8
Views: 2994

Re: Hornby Triang 0-4-0 Axle/Wheel swap?

With a little bit of cutting of the chassis, the smokey joe chassis will clip into the Nellie Body. I have done mine and kept the outside cylinders, this then makes them look a bit more like the old Southern C14 class, if you squint a bit!
by Stufiley
Mon Apr 01, 2013 9:26 pm
Forum: General Model Railway Discussion / News
Topic: Triang 3F Jumping On Points.
Replies: 17
Views: 3807

Re: Triang 3F Jumping On Points.

I have had the same problem with my Triang 3Fs. I bought some newer Hornby chassis from ebay with newer wheels sets and swapped the flanged driving wheels leaving the original flangless center wheels on the old chassis. This meant that quartering wasn't a problem. I have done all three of mine and I...
by Stufiley
Mon Mar 11, 2013 12:02 pm
Forum: Real World Railways
Topic: Br hst 125 scarborough
Replies: 4
Views: 884

Re: Br hst 125 scarborough

Great picture Jim,

That signal gantry is now on the North Yorkshire Moors Railway.

Stu
by Stufiley
Fri Feb 22, 2013 4:31 pm
Forum: General Model Railway Discussion / News
Topic: Cutting Hornby Point Motor Extender Rods
Replies: 6
Views: 1198

Re: Cutting Hornby Point Motor Extender Rods

I know this is not of much help but it is related. I use a heavy duty spring loaded cutter, these do cut anything, but onto the point motor pins. I was cutting one of mine and twitched slightly as I was cutting. This led to the bar dropping through the point motor and away under my railway and rolle...
by Stufiley
Fri Dec 28, 2012 9:57 pm
Forum: Hornby - including Lima, Rivarossi, Jouef, Electrotren
Topic: Is Railroad an appropriate name for the Budget Range
Replies: 18
Views: 2684

Re: Is Railroad an appropriate name for the Budget Range

I think its a shame that Hornby no longer have the Triang name, because a three tier grouping of model could have been called:

Starter - Triang
Standard - Triang-Hornby
Premium - Hornby
by Stufiley
Wed Nov 14, 2012 3:14 pm
Forum: Hornby - including Lima, Rivarossi, Jouef, Electrotren
Topic: 1966 Tri-ang 3F Found in Reading.
Replies: 8
Views: 1750

Re: 1966 Tri-ang 3F Found in Reading.

I have three of these in various guises, one of them was converted to a Souther Railways Q Class, not acurate but good enough for me. I have re-wheeled all the flanged wheels with newer hornby wheels, mainley from old Jinty chassis picked up cheap from ebay. Now with new wheels they all run great on...
by Stufiley
Thu Nov 08, 2012 11:58 am
Forum: General Model Railway Discussion / News
Topic: NRM 9F Owners Club.
Replies: 49
Views: 5524

Re: NRM 9F Owners Club.

I have two Railwroad 9Fs and think that they have to be the best locos in the Railroad range. Until last year I had never seen a 9F running, only Evening Star at the NRM in York. But now they have a 9F on the North Yorkshire Moors Railway, carrying the name **** of the North I have seen her running ...
by Stufiley
Tue Oct 30, 2012 11:48 am
Forum: General Model Railway Discussion / News
Topic: Oh, how things have improved in RTR
Replies: 19
Views: 2287

Re: Oh, how things have improved in RTR

I do think that having electric motors that you cannot change the carbon brushes is a very poor manufacturing issue. These are friction parts and they do wear! Can you imagine if your cars brakes and clutch were all built in and you couldn’t replace them with out having to change the engine? Are the...

Go to advanced search