Search found 156 matches

by AdamH1990
Mon Apr 25, 2016 1:02 am
Forum: Track/Layout Design
Topic: Peco Tracksetta
Replies: 4
Views: 946

Peco Tracksetta

Hello I am re building my layout, and I intend to get the track layed a lot better than it was, for the curves, im looking for 2nd-3rd-4th radius, I need help with knowing what tracksetta to use, I have seen these on some layouts and the curves look good, but smooth also! but what tracksetta there a...
by AdamH1990
Wed Oct 08, 2014 9:25 pm
Forum: DCC Forum
Topic: How do i reset lenz gold/silver decoders?
Replies: 4
Views: 526

Re: How do i reset lenz gold/silver decoders?

I will take a look! thanks guys!!
by AdamH1990
Wed Oct 08, 2014 9:24 pm
Forum: Baseboard Design and Construction
Topic: Noch Helix system
Replies: 6
Views: 1746

Re: Noch Helix system

Hello! thank you for replies!. Ive found some noch systems will fit in perfectly, its just the radius that worries me now, id like a helix system with 3rd-4th , i'm going to make sure the inner track is the track descending, outer loop rising! if i can get 2 of these systems to work i can design my ...
by AdamH1990
Sun Oct 05, 2014 10:04 pm
Forum: Baseboard Design and Construction
Topic: Noch Helix system
Replies: 6
Views: 1746

Noch Helix system

Hello! Im having to move my layout from my loft to my bedroom, i got 13ft long around 3 ft wide of space then it turns to a Right and again another 12 ft 2-3ft wide , thats the space i have for my layout, Now i'm really considering having noch helix system, so i can build 3 levels of my layout, but ...
by AdamH1990
Mon Sep 29, 2014 11:27 pm
Forum: DCC Forum
Topic: How do i reset lenz gold/silver decoders?
Replies: 4
Views: 526

How do i reset lenz gold/silver decoders?

Hey guys!
how do i reset these decoders, i need to change the address of a few decoders, Ive had a good look at the manual, unless im doing it wrong, probably am, im still new ish to dcc, but i just need to change the address , so how do i do this?
hope you guys can help!
Adam
by AdamH1990
Mon Sep 15, 2014 1:19 am
Forum: Scratch and Kit building
Topic: Fueling point/depot
Replies: 2
Views: 660

Re: Fueling point/depot

Hi Knightwing fuel point from express models. Also u can by the realistic lighting for the fuel point as well. Neil Hi Neil Thanks for the reply! Il check that out, i think is it express lighting that do a detailed fueling lighting kit? im not 100% but i swear blind i seen a lighting kit! express l...
by AdamH1990
Sun Sep 14, 2014 11:45 pm
Forum: Scratch and Kit building
Topic: Fueling point/depot
Replies: 2
Views: 660

Fueling point/depot

Hello Im in need of a fueling point! however i'm unsure what is out there in terms of kits or already made buildings, Id like something which is realistic but also with lights etc. for some reason im a fan of buildings with the proper lighting and of course i can add a few details myself such as add...
by AdamH1990
Thu Sep 11, 2014 2:30 am
Forum: DCC Forum
Topic: BM3 modules
Replies: 0
Views: 313

BM3 modules

Hello all! Ive bought some traintronic signals 3 aspect and 4 aspect dcc fitted, im going to wire them to my bm3 modules,, im having a section 7ft cap between my two bm3 modules to test run the signals and to learn how to wire them up!, how do you wire a section up and a put a signal in the middle o...
by AdamH1990
Fri Aug 29, 2014 10:09 pm
Forum: Electronics
Topic: Train coloured light signals for DCC Lenz set 100
Replies: 2
Views: 716

Re: Train coloured light signals for DCC Lenz set 100

Hello Pete12345 Thanks for your reply!!. A Diagram would be most helpful!. But your saying! You get 1 signal - wire red & green lights to the BM3 block module and wire the 3rd wire to the next bm3 module?. whats a relay switch? :oops: :oops: Ive been looking at traintronics signals ! http://www....
by AdamH1990
Wed Aug 27, 2014 9:14 pm
Forum: Hornby - including Lima, Rivarossi, Jouef, Electrotren
Topic: eLink and RailMaster Combination Pack with LENZ SET 100
Replies: 3
Views: 721

Re: eLink and RailMaster Combination Pack with LENZ SET 100

Ahh! thats a shame! it looked pretty good!. Il stick with railroad and co!. many thanks guys!
by AdamH1990
Wed Aug 27, 2014 6:16 pm
Forum: Hornby - including Lima, Rivarossi, Jouef, Electrotren
Topic: eLink and RailMaster Combination Pack with LENZ SET 100
Replies: 3
Views: 721

eLink and RailMaster Combination Pack with LENZ SET 100

Hello!! Has i have mentioned in my last 2 posts i have made on this forum!, Ive been out of the model railway scene for about 2 and half years! finally getting back into it! and a bit rusty! So im sorry for any stupid questions!. Anyway! onto the topic!. Ive just found Hornby bought out this softwar...
by AdamH1990
Sun Aug 24, 2014 3:43 pm
Forum: Electronics
Topic: Train coloured light signals for DCC Lenz set 100
Replies: 2
Views: 716

Train coloured light signals for DCC Lenz set 100

Hello All! Ive been away from the model scene for around 2 and half years!. So getting back into it! but Im at a stage on my layout where i need signals!. Now this is my first proper layout! I want to get it right and spot on with every detail! but I know nothing about train signals! :shock: :oops: ...
by AdamH1990
Sat Aug 23, 2014 11:06 pm
Forum: Hornby - including Lima, Rivarossi, Jouef, Electrotren
Topic: Hornby 56 and 60026
Replies: 4
Views: 648

Re: Hornby 56 and 60026

Thank you all for the replies !ollieollieollie Yes ! i did see this on ehattons but £107??? thats alot! I dont know if i will go for it or not! Well lets hope Hornby and bachmann get there suppliers sorted out real soon! the 60 and 56 are great models!!. I got a 56 ews from hornby ! but i was hoping...
by AdamH1990
Sat Aug 23, 2014 1:16 am
Forum: Hornby - including Lima, Rivarossi, Jouef, Electrotren
Topic: Hornby 56 and 60026
Replies: 4
Views: 648

Hornby 56 and 60026

Hello All Ive been out of the model railway scene for about 2 years roughly and just getting back into it! And i was looking to buy a class 60 and 56 ews livery! DCC ready and I know 2 years they were pretty big news! but i searched all evening and i cant find them anywhere not even on ehattons!. Ca...
by AdamH1990
Mon Oct 29, 2012 8:45 pm
Forum: DCC Forum
Topic: Lenz ls150 and peco PL11 side mount motors
Replies: 14
Views: 1942

Re: Lenz LS150 and peco point motors SL 11 side

Hi alll!!
I have the LS150 working , but my Peco sl 11 motors seem to be weak to switch Peco express points!. Is there anything i can do to make them switch the point or should i upgrade to better point motors?
Adam

Go to advanced search