Track Power and Control Accessories
R8250 Standard Train Controller
Controls the direction and speed of one locomotive. Input is 16V AC from the C990 mains transformer. Output is 0 - 12V to the track. Supplied fitted with 760mm lead with plug to connect to R8206 Power Track.
R8261 4th Radius Single Curve
Length: 572mm Arc: 45o
R8262 4th Radius Double Curve
Length: 572mm Arc: 22.5o
R8264 14.1MM Two-Hole Coach Wheels
Not Illustrated
Digital Command Control
R8248 Access One Infrared Handheld Controller
Connect to the Hornby Elite and enjoy total wire free train control. The Infra Red handheld unit includes many features that are incorporated into the Elite control including selected CV changing, large 4 digit display plus function control. The Access One IR Control may also be connected to the Hornby Select Unit but with limited function control. (Available 4th Quarter)
R8245 Sapphire Decoder
Supports 1 Amp continuous current with 1.5 Amp stall. low speed "gear" for shunting operations. Size: 23mm x 16.5mm x 6.5mm. Set amounts of "water" and "fuel" can be stored in the Sapphire providing real time fuel consumption. Burn rates can be selected. (Available 2nd Quarter)
R8246 Mini Sapphire Decoder
Supports 0.5 Amp continuous current with 1 Amp stall. low speed "gear" for shunting operations. Size: 23mm x 10mm x 4mm. Set amounts of "water" and "fuel" can be stored in the Sapphire providing real time fuel consumption. Burn rates can be selected. (Available 2nd Quarter)
R8247 Accessory Decoder
Similar to the R8216, but the four outputs are factory set for the operation of solenoid (point) motors, however, by adjusting the CV settings of each output a graduation of varying "bursts" of current up to a constant current (turntable motor operation, lighting, etc.) can be obtained for each individual output. (Available 1st Quarter)
